Glazed tile forming machine installation principles
|For the installation of the glazed tile forming machine, we need to pay attention to much general to pay attention to the installation of color steel equipment, screw selection. Also in the building structure or roof framework some of the temperature shift, although not as good as roofing so much, but still reduce the displacement between the roof and its supporting surface. Finally, due to the buckling of the purlin, especially in a cross, and further reduce this differential displacement.|
The glazed tile forming machine installed fixed transmission and a dark button hidden two. Transmission fixed is the most common way to install roof and wall color steel equipment, which uses self-tapping screws or rivets color plates fixed on the support, the transmission fixed is divided into fixed crest, trough fixed or their combination. There is a very simple, cost-effective way, that is, before installing roofing steel plates, purlins or battens capped double-sided reflective foil film, this method also can be used as steam isolation, to reduce the cohesion. In addition, with the exception of a dark button fixed with screws, other screws with a waterproof gasket and equipped with a dedicated washer for under the lighting board and a special pressure. Supply screw with plastic head, stainless steel top cover or coated with a special durable layer of protection. In addition, with the exception of a dark button fixed with screws, other screws with a waterproof gasket and equipped with a dedicated washer for under the lighting board and a special pressure. If the sagging depth to allow the film between the support 50 ~ 75mm, the air layer between the film and the roof will further enhance the insulation effect. The dark button concealed fixed matching with dark button color plates specially designed dark button first fixed on the support, the color board of the mother rib and the dark central rib ratcheting buckle fixed method, generally used for roof installation.
Self-tapping screw selection. Glazed tile forming machine fixed screw selection should be based on the life of the structure of the choice of fixed, and pay special attention to the life of the outer cover material specified a fixed life. The installation of color plates is easier to grasp, and some details of the deal is more important. Roof color plates in the roof and eaves of color plates corresponding to the received while working, its purpose is to more effectively prevent rainwater from entering the roof within. Between the terminal and the last support of the glazed tile forming machine expansion or contraction of a small part of the displacement only table in the display data, because the steel plate fixed displacement, usually starting from the center of each end tend to the steel plate. Each end of the displacement only expansion or contraction of half the amount. Also pay attention to steel purlin thickness can not be more than self-drilling screws. The supply screw with plastic head, stainless steel top cover or coated with a durable protective layer.
Zhongji Machinery Office
Tel: +86 21 68453855
Mob: +86 13916868669
Skype name: zjmachinery
ADD: NO.368 Xingdan Road,Qingpu industry District,Shanghai China
Australia head Office(SIDC)
Tel: +61 7 3206 9874
Mob: +61 423 050 845
Skype name: paucoo
ADD: PO Box 7531 Redland Bay Queensland 4165 Australia